Xuzhou Jiayu Solar Energy Technology Co.,Ltd.
North of Peigong Road, East of Hankang Road, Peixian Economic,Development Zone, Xuzhou City, Jiangsu Province, 221000, P.R. China
Website:
Email: [email protected]
Tel: +86 13151232006
Installation Manual
According to installation position as shown in table2
，
put PV modules on the aluminum rails.
Press clamps into the groove of aluminum rails. To ensure clamps is stuck. Use a mid-clamp connect
2 modules as shown in figure 2.Use an end-clamp to fix the edge module as shown in figure 1. Use
hexagon screwdriver to tighten the clamp on the rail securely.
All clamps
（
include bolts and flange nuts
）
are stainless-steel.
（
1
）
end-clamp
（
2
）
mid-clamp
2. Mounting Methods
Ground Mount
Select the height of the mounting system that prevents the lowest edge of the modules from being covered
by snow for an extended period of time in the winter months in areas that experience heavy snowfall. In
addition, assure that the lowest portion of the module is placed high enough so that it is not shaded by plants
or trees, or will not be damaged by sand or stone driven by wind.
6
/
13
