ADJUSTABLE HEIGHT WALL MOUNT SYSTEM
WM-65 & WM-54
www.jayprosports.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
© COPYRIGHT JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
Sheet 3 of 12
2022
S
A
F
E
T
Y
P
L
A
T
E
S
A
F
E
T
Y
R
O
D
Mounting
Hole
21"
28"
NOTE WALL TYPE MAY DIFFER
USE PROPER HARDWARE
1.
Determine where to place frame on mounting surface.
The frame is 28” x 21” (HXW). The frame holes are 16” on center. Use a level
to make drawing the horizontal line easier.
2. Draw a horizontal line at least 21” on the mounting surface
That is 87” up from the playing surface.
3. Unpack the frame.
Lay aside extension arms, mounting brackets.
4. Position and center frame bottom on the horizontal line
With the frame's safety rod at the top.
5. Level frame horizontally and vertically using a level.
Mark the mounting holes needed for attachment of frame.
6. Drill appropriate size holes as needed in mounting surface
Based upon type of wall fastener being used by customer or installer
7. Loosely attach frame to mounting surface
Fasteners to be determined and provided by the customer and/or installer.
8. Level frame horizontally and vertically
Using a level and appropriately tighten fasteners.
A measure, level, drills, and wrenches may be needed during assembly.
Frame Attachment
Important:
•
Bottom of frame should be 88” up from playing surface. This is needed to achieve full range of
system height adjustability.
•
Wall hanging location is the responsibility of the customer and/or installer.
•
It is the responsibility of the customer and/or installer to determine how many of the frame's
12 mounting holes must be used to safely secure the wall mount system for play.
•
Fasteners to be determined and provided by the customer and/or installer.
88" AFF
