ELITE Series Adjustable Portable Backstop Instructions
- 8 of 32-
JSL-Inst039
www.jayprosports.com
1.
Carefully remove any outer wrap or packaging materials.
a.
Use caution when using a box cutter or other sharp objects to
avoid scratching the powder-coated surfaces.
b.
Do not remove cargo straps (if installed) or j-hook until after
the backboard is completely installed.
2.
Raise feet all the way with a 1-1/2” open wrench or adjustable
wrench.
a.
It will be necessary to back off the jam nut that is jammed
against the underside of the frame.
b.
The front of the unit should now be resting on the wheels.
c.
Be careful not to loosen the nuts locking the leveling feet to
the threaded rod. Use the bottom nut on the leveling foot to
raise the leveling feet and the nut on top of the leveling to
lower the feet.
Figure 6-1: Back off Jam nut.
Figure 6-2: Raise feet using 1-1/2” open wrench.
3.
Carefully roll backstop off pallet or container.
WARNING: be sure that nobody is directly in front of or behind
backstop when rolling off pallet.
1) Use 1 3/8'' or adjustable wrench on the nut which is part of the leveling foot to raise the leveling feet.
2) Use 1 1/2'' of adjustable wrench on the jam nut on top of the leveling foot nut to lower the leveling feet.
1)
2)
