ELITE Series Adjustable Portable Backstop Instructions
- 23 of 32-
JSL-Inst039
www.jayprosports.com
7.
Lower the backstop to the transport position by removing the quick-
release pin and pulling back on handles until backstop is fully
lowered.
a.
Always stand on the same side of the unit as the ring on the
quick-release pin when pulling the pin; never reach across to
the other side of the upright to pull the pin.
8.
Pin the unit in the lowered (transport) position.
9.
Raise the feet until both feet are off the ground and the unit rolls
freely on all four wheels.
Padding Installation
Padding should be installed ONLY AFTER the foot heights have been set
(see section 8 above).
10.1
Included Padding & Hardware
Figure 10-1: Front Pad, (1X)
Figure 10-2: Side Pads (1X Right, 1X Left)
PBEL66/96
Figure 10-3: Upright Pads (1X)
