ELITE Series Adjustable Portable Backstop Instructions
- 30 of 32-
JSL-Inst039
www.jayprosports.com
Installing Anchor Kit
The anchor kit is included with the PBEL96 ONLY. See the Jaypro multi-
sport catalog to order for use with the PBEL66
6
.
The anchor kit is supplied with the FP-89 floor anchor, for use with all floor
types except floating wood floors. A brass cover plate is also supplied for
use with floating wood floors.
For installation in all floor types other than floating wood floors, Refer to FP-
89 installation instructions (included with kit) for details.
For installation in floating wood floors ONLY, unscrew the top plate from
the FP-89 floor anchor (Figure 13-1) and install with the brass cover plate
(Figure 5-7). Refer to FP-100 installation instructions (included with kit) for
details.
For all floor types, locate holes for floor anchors according to the
appropriate diagram:
a.
PBEL66 (66” overhang): refer to Figure 12-1
b.
PBEL96 (96” overhang): refer to Figure 12-2
Figure 13-1: Unscrew top plate of FP-89 to convert for use in floating wood floors.
Anchor the PBEL backstop to the floor anchor using the supplied shackles,
chain, and eyebolt. Attach anchor kit to eye on rear of ballast tray.
6
When ordering anchor kit for the PBEL66, be sure to specify floor type.
Unscrew
top plate
