page 14
www.jayline.co.nz
NOVEMBER 2016
To prevent the glass from the upper combustion chamber becoming black, you need to clean the air inlet
which is behind the upper door (stainless steel grill, see pictures below)
Also clean the gap in between the door and the refractory stones in the lower combustion chamber with any
fl at object. If this gap is not cleaned properly there will be no airfl ow coming down through it from above and
the glass of the lower door will not be cooled.
The grid in the lower combustion chamber and the injector block need to be cleaned. To remove the grid, you
need to lift the injector block out fi rst. Once done, carefully remove the grid. Clean and vacuum the chamber
and parts, then reinstall all items.
GRID
INJECTOR BLOCK
GRID
Hole needs to point to the door
FIG 6C.
FIG 6D.
FIG 6E.
FIG 6F.
FIG 6G.
FIG 6H.
FIG 6I.
FIG 6J.
