Jayco Qwest, Owner'S Manual, Page: 61 / 86

3. Attach the fuel hose to the grill and the LP gas connection located under the folding
camping trailer by using the “Quick-Coupler” instruction as follows (Fig. 5-3):
• Place the handle in the “OFF” position and push back the sleeve. Valve handle
must be in the “OFF” position to make the connection. (Fig. 5-4)
• Insert the plug and release the sleeve. (Fig. 5-4)
• Push plug until the sleeve snaps forward, locking the plug into the socket.
(Fig. 5-5)
• Turn handle to “ON” position to turn gas on. (Fig. 5-6)
4. Open the lid to the BBQ Grill.
5. Using an electic match, light the grill using the following procedures:
• Light the electric match.
• Insert it into the middle slot on the bottom of the BBQ Grill.
• On the grill control knob (Fig. 5-3), depress and turn the knob to the desired
temperature.
• The grill should light at this point.
6. If the grill does not light, turn the gas off, wait five minutes and repeat the above
steps.
7. Use the temperature control knob to adjust the grill to the desired temperature.
The BBQ Grill grate is coated with standard grill enamel and can be cleaned as you would
a grill at home. Underneath the grate, there is a heat defuser. This is formed and ventilated
to distribute the heat from the burner. Do not use lava rocks in this grill.
To disconnect the BBQ grill, turn the temperature control to the “OFF” position. Reverse
the above fuel hose hookup procedures. Wait until the grill is completely cooled, and then
store it in the supplied carrying case. This carrying case will ONLY accomodate a cool
grill. The grill carrying case has a pocket for accessories such as the fuel hose in the lid.
The bracket will not fit inside the carrying case and will need to be stored in a separate
location.
CAUTION: The BBQ grill must be COMPLETELY cooled before storing to avoid
damaging the carring case.
Fig. 5-4 Fig. 5-5 Fig. 5-6
53