Mounting the recorder
Before mounting the recorder, clean the mounting surface well.
1. Position the suction cup to smooth surface.
2. Press the suction cap against the smooth surface.
3. Push the locker down to fix the suction mount on the surface.
4. Snap in the recorder to the suction mount.
5. Adjust the mounting arms to suit your viewing angle. Tighten the screw on the mount to
fix the position.
Remark: To maximize the effectiveness of the suction mount, it is recommended the
application is performed under the following conditions:
Surface temperature should be between 21
℃
to 38
℃
(70
℉
and 100
℉
).
Application below 10
℃
(50
℉
) should be avoided.
Application should be avoided in direct sunlight.
Mounting should be protected from exposure to direct sunlight for a period of 24 hours.
5. LOCATION OF CONTROLS
Front View
TIME/DOWN
RECORD/UP
PLAY/PAUSE
GPS/ GREEN
IR LED
Summary of Contents for QV-3798
Page 1: ...Car Event Recorder QV 3798 INSTRUCTION MANUAL ...
Page 4: ......
Page 6: ...Side View A Side View B ...