cxlv
Figure 7-51
Please refer to the following sheet for detailed information.
Parameter Function
Event
Type
The abnormal events include: no disk, no space, disk error, net error.
You need to draw a circle to enable this function.
Normal
Out
The corresponding alarm activation output channel when alarm occurs,
There are three channels.
Latch
The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
The value ranges from 10s to 300s.
Send
email
If you enable this function, system can send out email to alarm the
specified user.
Alarm
upload
System can upload the alarm signal to the network (includes the alarm
centre.)
Show
message
System can display alarm information in local DVR screen.
7.3.3.8
Matrix Spot
Matrix spot interface is shown as below. See Figure 7-52.
Please note the 1U series product does not support this function.
Here you can set video matrix tour channel and interval.
Summary of Contents for N5 series
