AAA-055-00188
Jaylor Owner Manual
-30-
5000 Series Truck Mount Models
Unloading Procedure
Follow these guidelines when unloading the machine:
1. Transport the machine to the feeding area.
2. If not already done, engage the hydraulic pumps to start auger rotation.
3.
a. For models equipped with front discharge use a combination of the opening of the unloading
door, speed of the conveyor, and ground speed to distribute the feed mixture to the desired
areas. Follow this order:
i. Start the conveyor
ii. Raise the unloading door
iii. Start the auger if not already turning
iv. Drive along feeding bunk/area to unload the feed mixture
b. For models equipped with center side or corner door discharge use a combination of the
opening of the unloading door and ground speed to distribute the feed mixture to the desired
areas. Follow this order:
i. Raise the unloading door
ii. Start the auger (if not already moving)
iii. Begin driving along feeding area to unload the feed mixture
4. Monitor scale indicator readings to evaluate ration distribution to unloading areas.
5. Continue unloading until mixing chamber is empty or desired amount of mixed ration has been
unloaded.
IMPORTANT:
It may be necessary, in order to completely empty the mixer of all commodities, to
turn the auger at the fastest speed possible. This will propel the feed that is resting on the auger off
its flights, and allow the auger to unload this.
