JAY
•
LOR
®
Operator’s Manual
- 29 -
Trailer Units - Models 2875 - 21000
SHEAR BOLT PROTECTED DRIVELINE
Should excessive loads be placed on the driveline, the shear bolt will rupture. This is a
safety feature, however, do not depend on this as the maximum load indicator. The shear
bolt will be located in two possible locations, depending on options equipped with the
machine. On standard units the shear bolt is located on the machine end of the PTO shaft
supplied with the machine. On units equipped with the 2-speed transmission option, the
shear bolt is located directly behind the 2-speed transmission on the end of the driveshaft
that connects to the output shaft of the transmission.
Figure 12 - Shear Bolt Location (Standard Driveline).
OUTPUT
SHAFT
2-SPEED
TRANSMISSION
SHEAR BOLT
YOKE ASSEMBLY
DRIVESHAFT
SHEAR BOLT
NUT
Figure 13 - Shear Bolt Location (Units w/ 2-Speed Transmission).
