JAY
•
LOR
Operator’s Manual
- 23 -
Trailer Units - Model 2425
CONTROLS
Weighing
The scale system on
standard models includes
(4) weighbars located at the
mixing chamber mounting
points. The weighbars
electronically measure the
amount of ration inside of
the mixing chamber.
There are various scale
indicators available for use
on your JAY
•
LOR
Cutter-
Mixer-Feeder. The mounting
assembly for most Weigh-
tronix
Scale Indicators is
the same. When attaching
the indicator to the machine,
be sure that it is securely
fastened. Typically, the
indicator slides down into
the mounting bracket, and it
is also necessary to use a
wire or plastic fastener to
secure the indicator to the mounting bracket. For more information on mounting, refer to the
Weigh-tronix
manual included in this binder.
Most scale options configured in trailer
applications use a single scale indicator. The
scale indicator is located on the front side of the
viewing platform on the front of the machine.
The mounting bracket assembly has (2)
mounting locations on the viewing platform
which allows the scale indicator to be turned to
face every direction.
Note:
Once the desired position of the scale indicator is set, ensure that the mounting
bracket assembly nut is tightened firmly to secure the bracket to the viewing
platform.
Figure 6 – Main Scale Indicator.
Figure 5 - Scale System Weighbars.
