Jay electronique Orion, Installation And User Technical Manual

Page: 106 / 176

- 106 -
Orion
- 324501G
FR DE EN
9 - Servicing
BEFORE STARTING ANY SERVICING OPERATION, SWITCH
OFF THE MAIN POWER SUPPLY FOR THE SYSTEM
CONTROLLED.
- Housing of the ORE transmitter must not be opened. Except to
modify the identity code or to change batteries, in that case, open the
transmitter housing in a clean place, dry and exempt from dust.
- If one of the function buttons or the seal of the transmitter is
damaged (or in an incorrect position), the transmitter must not
be any more used until replacement of these tightness spare
parts.
In opposite case, any liquid, any dust or any foreign body can damage
the transmitter.
- The attention of the user is attracted to the risks of the use of the remote
control in an environment containing solvents of polymers or glues
which can degrade the good functioning of transmitter mechanical
parts.
- Verify regularly the good state of the transmitter, paying a special
attention on the function buttons, batteries / accumulators, the
tightening of housing screws the seal (multifunction transmitter OREL).
- Clean the transmitter by eliminating any foreign matter.
Only use non aggressive cleaning product on base of soapy
solution.
Servicing the ORE transmitter :