8.3. Table of Lubricants Used
Oil
(Viscosity Class)
Grease
Gear box
SAE 80 W
API
GL-4
MOGUL TRANS 80
TRYSK GYROL 80W/90
MADIT PP 80
CASTROL EP 80
SHELL Spirax EP (MA)
Bowden cables
MOGUL TS
Lever pins
SAE 80 W
API
GL-4
MOGUL TRANS 80
TRYSK GYROL 8OW/90
MADIT PP 80
CASTROL EP 80
SHELL Spirax EP (MA)
Speedometer drive
Gas grip
MOGUL LA 2
SHELL Retinax A
AGIP GREASE 30
Front fork
SAE I0W-30
M 3 ADX
CASTROL TQ Dexron
Rear springing unit
AMG 10
CASTROL HYSIN AWS 10
Secondary chain
CASTROL Super Ketten spray
TEXACO Ketten spray
Engine lubrication TSC-1
MOGUL TS
CASTROL Super TT
SHELL Super 2TX
8.4. Gear Oil Level Check
Stand the motorcycle vertically so that it is not
deflected to one side.
Its deflection will cause incorrect measurement.
Unscrew the oil check plug (1), and check if the oil
reaches minimally up to the lower edge of the
check hole.
If the level is lower, refill the relevant oil.
8.5. Gear Oil Replacement
Start the engine and let it heat up for 1 to 2 minutes.
Place an oil vessel under the engine.
Unscrew the filling plug (1), check plug (2), and
drain plug (3), and let the oil get out (Figure 22).
Screw in the drain plug and tighten it. The torque is
20 N.m
Refill 0.4 1t of recommended gear oil into the
filling hole.
After refilling the gear box check, if oil does not
leak out of the drain plug or oil level check plug.
18
