- 5 -
Please turn off the power of the projector and the signal before connecting, may be it
will bring troubles if connecting under the condition of power turning on.
Please confirm whether the plug of line is fit to the input connecting of the projector, the
projector will be mangled if insert the plus with different figure and different pins.
Set projector to the “VGA” by using the button “PC/ AV”.
You’d better set the resolution and frequency to 800×600 and 60HZ when connected
with the computer.
Connected with the video and audio
The signal source (DVD/ VCD/ Video Recorder/Camera) input by using A/V cables
(red/ white/ yellow).
Notice:
After connecting, please set menu to AV input by using the button “PC/ AV”.
Video output and left/right Audio output of signal source should connect with
corresponding input port.
To play and tune high quality sound effective, you can connect the signal source of
audio output with audio input port of audio play equipment such as amplifier and
loudspeaker.
Connected with loudspeaker
You only connect audio output port with the loudspeaker which taking amplifier by an
audio cable, then you can enjoy the beautiful bourdon.
Please use the designated-type cables for the connection.
Section 3 Control Buttons
The picture is as follows:
○
1
Channel Switch Button/Select an item to operate