34
Front Projector
Front Projector
DLP
DLP
Adjust the zoom or projector position.
Adjust the image width. Please refer to page 23 for details.
Rotate the projector lens and adjust the focus.
Make sure the distance between projector and screen no less than
4.9'(1.5m) and the projector position at a 90 degree angle to the
screen.
Detect whether the lens need to be cleaned.
Make sure the batteries in the remote control are sufficient enough.
Make sure the batteries are installed correctly.
Detect the audio input connectors.
Adjust the volume of projector or audio signal source.
Make sure the loudspeaker isn’t mute.
May be the Rear-projection mode is selected. Please close the Rear
under the System menu and refer to page 24 for details.
Try to configure the projector again and refer to page 22 for details.
Adjust the image tone. Please refer to page 23 for details.
.
Just like the colors may be diversified on different computers, the
images showing on computer may distinguish from displaying on
projector as well. Please adjust the Brightness, Color, Contrast under
the Main menu, refer to page23 for details.
After using for a long period, the brightness of lamp may be weaken.
Please change the lamp as the ways listed on page30.
Error: the image width is not suitable for the screen.
Error: the image is not focus
Error: no response from the remote control
Error: no sound available
Error: the image and menu are in reverse
Error: the image is distorted
Error: the projection color can’t match to the computer
or video player
Error: the lamp is darker more.
