background image

Introduction

The new-designed projector has the advantages of convenient taking 

away, simple connection and harmonious coordination, which is not only 

easy to connect, easy to use, but also easy to maintain.

Image Resolution

The resolution of the projection image (XGA) is 1024*768, compatible 

with the projector screen with the resolution of 1280*1024 at most. The 

computer resolution should be adjusted to be lower while it is higher 

than 1280*1024 before connecting to the projector.  

Compatibility

The projector supports diversified computers and video equipments 

compatible, which include:  

      Computers with IBM compatible (desktop included, resolution 

1280*1024 permitted mostly). 

      Apple Macintosh and PowerBook computers (resolution 12*1024 

permitted mostly)

     Most VCR, DVD player, Video camera, digital camera and laser CD 

player complied with the common standards.

Package Unfolding Notice

The projector items as shown on Fig.1. Please make sure all lists are 

included. Otherwise, contact the seller for missing immediately. 

     If you are experienced in setting up prese Remote Control and 

Batteriesntation systems, use the included Quick Set Up card. For 

complete details on connecting and operating the projector, refer to this 

User’s Guide. 

Note: the projector 
can extend the image 
with the resolution 
from 640*480 or 
800*600 to 1024*768 
automatically.

5

Front Projector

Front Projector

DLP

DLP

Summary of Contents for ADS-513








































Reviews: