Turn on the projector power supply
1
Plug the power cable into the side of the projector and plug the
remaining into the power supply slot, the surge protection wiring board
is suggested.
The LED indicator will be shown with blue (Fig.6 on page 6)
。
2
Press the power button on the top of the projector.
。
The fan will run as long as the projector connects well, the LCD
indicator will be shown with red (Fig.6 on page 6) and then the
screen will be initialized, after one minute, the image will be clear
.
3
If there is a video player available, please turn it on.
The image should be shown on the screen, if not, pressing the
Source/Select on keypad or Video button on remote control to
display.
4
If there is computer available, please turn it on.
When the projector connects the computer for the first time, the
computer will show “Detect a new hardware” and the new hardware
guide will be poped up, add the proper driver under the direction of
the guide (installed accompanied with Windows).
Select “The optimized driver” and click “Next”.
Note: the power
supply cables offered
by the projector seller
should be used
extremely.
Note: when the
projector connects the
computer for the first
time, the computer will
show “Detect a new
hardware” and the
new hardware guide
will be popped up,
add the proper driver
under the direction of
the guide (the
projector is
considered as a “Plug
and Play” display).
14
Front Projector
Front Projector
DLP
DLP
