18
www.javad.com
to the indicator’s 95%, 99.5% and 99.9% states,
respectively. The higher the specified confidence
level, the longer the integer ambiguity search time.
This is the price one pays for the higher reliability
of the ambiguity fixed solution.
Figure 13. Rover tab
9. For RTK survey, open the
Ports
tab and set up the
parameters according Table 2, then click
Apply
.
Note:
For the survey with the post-processing keep default
parameters..
Figure 14. Ports tab
Parameter
Base
Rover
Input
-
The same correction type as
Base has
Output
Select the correction type. -
Period (sec)
Set the period of
correction output
-
Baud rate
Baud rate for the corresponding receiver port
RTS/CTS
Enable
10. Open Advanced tab, and then Multipath
Reduction subtab. Activate Code multipath reduction
(mpnew) on base and rover for DGPS mode.
For RTK mode activate Carrier multipath reduction
(mpnew) as well (mpnew).
Figure 15. Multipath Reduction
11. Click Apply, to save the made changes and
settings into receiver’s memory and close the dialog
window. The receiver configuration will be kept in the
receiver till you will change them or will clear NVRAM.
Note:
For detailed description of settings and parameters see
NetView Software Manual..
MINPAD CONFIGURATION
The TRIUMPH-1M’s simple user interface (MinPad)
consists of two keys (Power and Record) and up to six
LEDs that control and display the receiver’s operation
(see Figure 3 on page 12).
The MinPad performs numerous functions:
• Turn the receiver on/off.
• Turn data recording on or off (Record button).
• Show the status of satellites being tracked (SAT
LED).
• Show data recording status (REC LED).
• Show each time data records to internal memory
(REC LED).
• Show the status of post-processing mode (static
or dynamic) when performing a Post-Processing
Kinematic measuring with the help of Record but-
ton (REC LED).
• Show the status of the battery (BAT LED).
• Show the power source for TRIUMPH-2 (BAT
