14
www.javad.com
Figure 7.
Receiver’s ports
EXTERNAL ANTENNA
CONNECTOR (OPTIONAL)
The external antenna connects to the TNC external
antenna connector (optional).
ATTACHING UHF/GSM
ANTENNA
A broadband, rugged, in-building or outdoor an-
tenna designed to service the whole 406-470 MHz
UHF band and GSM quad band. With modest dimen-
sions of 25 mm (OD) x 182 mm (height), this antenna
radiates with a typical peak omnidirectional gain of
+1 dBi. Internally, the radiating element is DC shunted
to help protect the transceiver from nearby, but not
direct ElectroStatic Discharge (ESD).
The TRIUMPH-1M modem antenna can be mount-
ed on standard poles (5/8-11inches thread). Attached
to the 1 receiver this antenna gets a part of survey
pole, making handling with receiver easy and simple
MOUNTING
The bottom connector connects the receiver to ei-
ther a standard 5/8-11’’ mounting thread pole/adapt-
er or the quick disconnects.
CABLES
The TRIUMPH-1M receiver package includes stan-
dard communication and power cables for configur-
ing the receiver and providing a power source to the
receiver.
• Receiver-to-computer RS232 serial cable – con-
nects the receiver’s serial port and an external
device (hand-held controller or computer) p/n 14-
578103-01
• Receiver-to-SAE power cable – connects the re-
ceiver’s power port and the power supply’s SAE
connector or the extension cable’s SAE connector
p/n 14-578101-01
• SAE-to-SAE cable extension – connects SAE con-
nectors over longer distances p/n 14-578102-01
• Power supply with SAE connector p/n 22-570101-
01
• Cable Power/Charger Euro p/n14-508053-01/ Ca-
ble Power/Charger US p/n 14-508052-01
OPTION AUTHORIZATION
FILE (OAF)
JAVAD GNSS issues an Option Authorization File
(OAF) to enable the specific options that customers
purchase. An Option Authorization File allows cus-
tomers to customize and configure the TRIUMPH-1M
receiver according to particular needs, thus only pur-
chasing those options needed.
Typically, all TRIUMPH-1M receivers ship with a
temporary OAF that allows the receiver to be used for
a predetermined period of time. When the receiver is
purchased, a new OAF activates desired, purchased
options permanently. Receiver options remain intact
when clearing the NVRAM or resetting the receiver.
MANAGING AND OPERATING
RECEIVER USING NETVIEW
This software is available on the JAVAD GNSS web-
site. If downloading the program(s) from the website,
extract the program’s files into a folder on your hard
drive. The following sections describe installing this
software, and other sections throughout the manual
describe using this software with the receiver.
Note:
Refer to the NetView Software Manual for full details
on installing and using NetView Software.
1. If downloading the program from the website,
extract the program files into a folder on your hard
drive.
2. Navigate to the location of the NetView program
and double-click the Setup.exe icon.
3. Follow the on-screen installation instructions.
