44
LGG100-GG Operator’s Manual
www.javad.com
S E T U P A N D M E A S U R I N G
LGG100-GG Setup
3
Step 3
Collect Data
1. To begin collecting data, press and hold the
FN
(function) key for more
than one second and less than five seconds.
2. Release the
FN
key when the REC (recording) LED light turns green.
This indicates that a file has opened and data collection has started. The
REC LED blinks each time data is saved to the internal memory.
Tip:
You can use PCView to configure data logging. See “MinPad
Configuration” on page 33 or refer to the PCView Software Manual for
more information.
3. When finished, press and hold the
FN
key until the REC LED light
goes out.
4. Press and hold the
power
key until all lights go out, then release.
