www.javad.com
LGG100-GG Operator’s Manual
29
C O N F I G U R A T I O N
LGG100-GG Configuration
flow control (if applicable) – display in the lower-left corner of the main win-
dow of PCView.
A timer begins to count up in the lower-right corner as well (Figure 2-3).
Figure 2-3. PCView Connection Established
LGG100-GG Configuration
PCView is JNS’s receiver configuration software, used to configure the
LGG100-GG. Any settings made using PCView will be saved in the receiver’s
memory, and will be reflected when you use the MinPad. The full range of
PCView configuration and function is outside the scope of this manual.
Notice:
Refer to the PCView Software Manual to manage all possible LGG100-GG con-
figurations.
The following configuration is recommended for the most common applica-
tions. However, you can select configuration parameters as needed for your par-
ticular jobsite.
Notice:
Click Apply after making any configuration change, otherwise the receiver will
not accept the change.
1.
Connect your LGG100-GG and computer. See “Connecting the LGG100-