English
User manual RF remote MS3
27
Replacing the driver unit
(only by installer)
Place the panel into Manual mode by following the instructions under Manual
tilting mode.
The driver unit can be taken out of the stile when the louver as well as the
slotted point driver is in horizontal position. See picture below. In this way, the
gear system would not be damaged.
Unscrew the 2 top screws. Also unscrew the 2 bottom screw, placed behind
the battery cap.
You could also fix the driver unit into the stile when the louver as well as the
slotted point driver is in horizontal position.
