English
User manual RF remote MS3
25
Manual tilting mode
Your RF system includes a manual option that allows you to adjust your
shutters by hand without a remote control, giving you more control flexibility,
as well as the ability to adjust your by hand in the event of low or dead battery.
To begin, locate the “M” (Manual) and “R” (Remote Control) switches on the
Receiver / Driver as pictured.
To switch to Manual mode, use a coin to release the clutch and turn the dial
to “M.”
DO NOT force the rotation of the louvers. If the dial has been turned to “M”
properly, no excessive force is necessary. Forcing the louvers to rotate without
releasing the clutch and turning the dial to “M” will cause serious damage to
your RF system.
To revert back to “R” (Remote Control) mode, install fresh batteries into the
driver, turn the dial back to “R” and then reprogram.
Turn to “M”
for temporary
manual moving
Retrieve to “R”
for driver working
