Jasic MIG 350 Pulse Separate, Operator'S Manual

Page: 15 / 35

WWW.JASIC.CO.UK 15
actual welding voltage and the contents of the column parameters. Users can select the desired
parameters by pressing the selecting key, and the corresponding LED will be on when a certain parameter
is selected. Meanwhile, the contents of the selected parameter will be displayed on the meter.
Note: The meter will display the actual voltage when the main power circuit is connected. To modify a
parameter, users should make corresponding LED flash by pressing the selecting key.
Base metal selecting zone
This area contains components such as base metal LEDs
and selecting key. Base metal includes carbon steel,
stainless steel, aluminum alloy, aluminum magnesium
alloy, pure aluminum . Users can select the desired base
metal by pressing the selecting key, and the
corresponding LED will be on when a certain kind of base
metal is selected.
Note: There is no such function in MMA .
Gas selecting zone
This area contains components such as gas LEDs and selecting key. Gas
includes 100% CO2, 80% Ar+20% CO2, 90% Ar+5% CO2+5% O2, 98%
Ar+2% CO2 and 100% Ar . Users can select the desired shield gas by
pressing the selecting key, and the corresponding LED will be on when a
certain kind of shield gas is selected.
Note: There is no such function in MMA .
Wire diameter selecting zone
This area contains components such as welding wire LEDs and selecting
key. Welding wire includes solid wire of Φ0.8, Φ1.0, Φ1.2 andΦ1.6, flux-
cored wire ofΦ1.0, Φ1.2 and Φ1.6 and Flux cored. Users can select the
desired wire by pressing the selecting key, and the corresponding LED will
be on when a certain kind of wire is selected. The flux-cored wire LED on
indicates that flux-cored wire is selected, while the LED off indicates that
solid wire is selected.
Note: There is no such function in MMA .
Parameter adjustment knob
This area contains the parameter control knob and adjustment indicator. All
welding parameters are set by adjusting this knob. The adjustment indicator
tells users that the knob is effective only when the corresponding parameter LED
in the current column or voltage column flashes.