parts diagram
Gear Housing
Intermediate Housing
Bearing Clamp
Left Hand Thread
Tapered Bearing Cup
Tapered
Bearing Cone
Spacer
Tapered
Bearing Cone
Clearance Setting
Tapered
Bearing Cup
Place Shims Here to Set Bevel Gear Backlash
Tapered Bearing
Cone
Hex Nut
Long Stud: Use 6 mm Allen Wrench to Hold
Short Stud: Use 6 mm Allen Wrench to Hold
Hex Nut
Left Hand
Thread
Spacer
Clearance Setting
Gear and Blade Shaft
Bevel Gear
1. Set bearing cone clearance:
IF tight, add shims to achieve proper fit; replace spacers if necessary.
IF loose, remove shims to achieve proper fit.
2. Backlash of bevel gears should be 0.003 to 0.007 inch.
3. Bevel side of retaining ring must be facing away from gear housing.
4. Use
Loctite 262
on hex nuts.
5. Pack all bearing cones and bearing cups with
Jarvis
1315
White Grease
when clearance adjustments are completed.
Notes
Figure E
Thin Head Gear Housing
Assembly
(Section View)
Place or Remove Shims Here
to Set Bearing Cone Clearance.
Place or Remove Shims Here
to Set Bearing Cone Clearance.
Retaining Ring
Model SEC 400
page 8 of 24
JARVIS
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--MAIL.
TEL. 860--347--7271 FAX. 860--347--6978 WWW.
jarvisproducts.com
6204004;.
®
