notice to operators, maintenance
and cleanup personnel
page 3 of 12
Model AN--10K1
JARVIS
6244001:
®
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--MAIL.
TEL. 860--347--7271 FAX. 860--347--6978 WWW. j
arvisproducts.com
NOTICE TO OPERATORS, MAINTENANCE AND CLEANUP PERSONNEL
ANY MALFUNCTIONING TOOL MUST BE REMOVED FROM SERVICE
REPORT ANY PROBLEMS TO YOUR SUPERVISOR
1. Disconnect
air hose in accordance with OSHA’s lockout/tagout procedures (29 CFR 1910.147) before
performing any repair or maintenance.
2. Disconnect
air hose -- or have the air hose disconnected -- in accordance with OSHA’s lockout/tagout
procedures (29 CFR 1910.147) before performing any cleanup.
3. Disconnect
air hose when the tool is not being used.
4. Never
put fingers, hands or other parts of the body directly in front of the tool.
5. Always
wear eye and ear protection when operating the tool.
6. Always
keep operator’s head a safe distance away and off to one side of the tool when stunning to avoid
injury from the tools recoil.
7. Test
the tool prior to use or daily. Using the Jarvis Stunner Tester is the preferred testing method; howev-
er the following procedure can also be used:
Squeeze
the trigger and depress the trigger contact bushing
against an unmounted rubber tire to activate the tool.
If the tool malfunctions, remove it from service
and report or repair it immediately.
8. Never
squeeze the trigger unless you want to use the tool.
9. Never
make modifications or alterations to the tool.
Replace any missing or illegible labels.
Keep body parts clear
