7
· Align the holes of the rotate base with the outer countersunk holes of the
on ground base. Insert the stem bolts (4) and tighten them by using an allen
wrench (A).
Note:
The rotate base, stem bolts (4) and allen wrench A are always
included with the outdoor umbrella.
· Align the outer countersunk holes of the on ground base with the drilled holes
in concrete. Insert the upper part of the expansion bolts into the drilles holes
through the on ground base. Tighten them by using an allen wrench (B).
Note:
Wait at least 48 hours before installing the parasol. Refer to outdoor
umbrella manual for further installation and operating instructions.
B
Rotate base
On ground base
Allen wrench A
Stem bolts (4)
