2
2. Features
This UNI-SENSOR 701A is a product of outstanding safety and reliability. Its main features
are shown below.
①
The resolution of 1°C that is enough to measure the iron tip temperature is implemented
at a low cost.
②
Optimum shape to measure the iron tip temperature of the soldering robot.
③
High response speed allowing your quick operation
④
A wide choice of sensors you can select according to your purpose
⑤
This thermometer is operable in a dark place because a back light is installed as
standard.
3. Checking the Thermometer
Take out the UNI-SENSOR 701A from the package at first. Check the supplied parts one by
one from the following figure to see if you have all parts and if any of them is not damaged. If
you do not have any of them or if any of them is damaged, contact the dealer from which you
have purchased the thermometer.
4. Specifications
Model
UNI-120 (Type 5)
Sensor input
TYPE K (CA) Thermocouple
Display resolution
1°C (0.1°C at measurement not exceeding 199
℃)
Measuring range
Room temperature to 500°C (with the sensor
“UNI-9” for the
standard iron tip)
* Maximum measuring range: -99 to 1200°C (Basic
characteristic of the main unit. Actually, this depends on the
applied sensor.)
Indication accuracy
Tolerance of display:
±
0.3% of rdg
±
2 dig
Temperature coefficient:
±
0.03% of FS/°C
Sampling period
3 times/second
Cold junction compensation
accuracy
± 0.5°C (at 25°C
±
10.0°C)
Power source
9V, Type 006P Alkaline dry cell × 1
Operating time
Continuous 100 hours or more (when the back light is OFF)
Remaining battery power decrease indicating function
Operating switches
POWER (ON
・
OFF)
・
HOLD
・
MODE
Case
Main unit
Sensor for the iron tip
UNI-120
UNI-9
