8
7. How to Use Each Sensor (Option)
①
How to put the surface sensor to the target
Put the surface sensor to the contact surface of the
target vertically.
Note that the thermometer cannot detect the
correct temperature if the contact surface of the
target is not smooth or flat. (The upper limit of
measurement is 200°C.)
* Do not use it for the soldering iron.
(UNI-1)
②
How to measure the temperature of a board
Use a heatproof tape to paste the sensor onto the
place of a board whose temperature you want to
measure. (The upper limit of measurement is
200°C.)
(UNI-8A)
③
How to measure the temperature of a solder bath
Push the sensor through the solder bath to
measure the temperature of the inside of the
solder bath.
This sensor is not suitable for measurement of
small dots and surfaces.
Dip an end portion (at least 200 mm) of the sensor
in the material to be measured (for example, melt
solder).
(UNI-2)
