48
1.2.12 Label Set
Printing start position ( only for label )
DC2 + “k” + n1 + n2: Set the position of the printing start
HEX:12 + 6B + n1 + n2
DEC:18 + 107 + n1 + n2
・
Define the line number with n1 (lower byte) + n2(upper byte).
It defines the number of line from the label detection to the printing position.
0
≦
n1n2
≦
4095
When using the label, use this command before using the paper setting
command.
Default value is 0H ( 0 line ) when the power is on.
Set the length of the label ( only for label )
DC2 + “L” + n1 + n2: Set the length of label
HEX:12 + 4C + n1 + n2
DEC:18 + 76 + n1 + n2
・
Define the line number with n1 (lower byte) + n2(upper byte).
0
≦
n1n2
≦
4095
Set the length from the label detection to the hole by the line.
If it can’t detect the hole with feeding more than the set line when detecting the
hole, it stop
As the paper error.
When using the label, use this command before using the paper setting
command.
Default value os 0H ( 0 line ) when the power is on.
