42
Narrow width dot : Wide width dot
0 1 2 3
0 2:5 2:6 2:6 2:6
1 3:7 3:8 3:9 3:9
2 4:9 4:10 4:11 4:12
If the width of the bar code got too long, it won’t be printed at all.
*) Compatible with the AI-220 board
When printing the NW-7, the ratio of the narrow and wide width for AI-220 is
2 : 6. Please set as n1=0, n2=11. ( subsidiary setting: AI-220 2 : 5 )
GS + “j” + n: Set the width of JAN module
HEX:1D + 6A + n
DEC:29 + 106 + n
Set the width of JAN module with 3 steps.
N=1 0.5times N:W=0.0625 : 0.125
N=2 1timesN:W=0.125 : 0.25
N=3 1.5timesN:W=0.187 : 0.5
Default value is n=2 1 times
9) Printing
Control
DC2+”S”+n: Set print density
HEX: 12+53+n
DEC: 18+83+n
Makes the print density n% thicker.
10
≦
n
≦
255
・
Possible to set 10
～
255% of the standard density.
・
Default value is 100%.
・
When you set the print density by DIP switch, it is regarded as the default
value.
(See the table below.) When you set it by control code, it is required to multiply
by10
～
255%.
