background image

emWEB-21 (

Hardware Manual

)  

  Open Source Licensing 

4 - 25 

 

Rev. 1.1 

© Janz Tec AG 

 

However, unrestricted linking of non-free programs would deprive the users of those programs of all benefit 

from the free status of the libraries themselves. This Library General Public License is intended to permit 

developers of non-free programs to use free libraries, while preserving your freedom as a user of such programs 

to change the free libraries that are incorporated in them. (We have not seen how to achieve this as regards 

changes in header files, but we have achieved it as regards changes in the actual functions of the Library.) The 

hope is that this will lead to faster development of free libraries.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the 

difference between a "work based on the library" and a "work that uses the library". The former contains code 

derived from the library, while the latter only works together with the library.  
Note that it is possible for a library to be covered by the ordinary General Public License rather than by this 

special one.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library which contains a notice placed by the copyright 

holder or other authorized party saying it may be distributed under the terms of this Library General Public 

License (also called "this License"). Each licensee is addressed as "you".  
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with 

application programs (which use some of those functions and data) to form executables.  
The "Library", below, refers to any such software library or work which has been distributed under these terms. 

A "work based on the Library" means either the Library or any derivative work under copyright law: that is to 

say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated 

straightforwardly into another language. (Hereinafter, translation is included without limitation in the term 

"modification".)  
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, 

complete source code means all the source code for all modules it contains, plus any associated interface 

definition files, plus the scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its 

scope. The act of running a program using the Library is not restricted, and output from such a program is 

covered only if its contents constitute a work based on the Library (independent of the use of the Library in a 

tool for writing it). Whether that is true depends on what the Library does and what the program that uses the 

Library does.  
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any 

medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright 

notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any 

warranty; and distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty 

protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the 

Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that 

you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of 

any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this 

License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application 

program that uses the facility, other than as an argument passed when the facility is invoked, then you must make 

a good faith effort to ensure that, in the event an application does not supply such function or table, the facility 

still operates, and performs whatever part of its purpose remains meaningful.  
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined 

independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table 

Summary of Contents for emVIEW emWEB-21








































Reviews: