emWEB-21 (
Hardware Manual
)
•
Installation
2 - 9
Rev. 1.1
© Janz Tec AG
The emWEB-21 is delivered in a configured state, but the configurations can be adjusted by the user
as well. To adjust the emWEB-21s configuration, an OSD (On Screen Display) is installed and
controllable by buttons at the backside.
The package also contains a terminal plug for the power connector. The emWEB-21 needs a power
source in between 14 to 30V DC for operation.
The installation of this equipment is allowed for qualified service personnel, only.
Auxiliary existing rules for installation of electrical equipment must be attended to.
2.1 Dimensions and mounting information
figure 1: emWEB-21 measures
The needed cut-out measures are given in figure 2. The overall front panel dimensions are denoted
with W and H. D is the depth of the case. The front has 8 mm thickness.
W
H
D
570.1 mm 366.7 mm 33.6 mm
table 1: emWEB-21 dimensions
W
H
D
