3 - 16
emWEB-21
(
Hardware Manual
)
•
Operating System and Drivers
©
Janz Tec AG
Rev. 1.1
Figure 6 - Webmin overview
On the first boot the system has to be configured for the kiosk mode. This includes to define a default
homepage which should be loaded after starting the operating system.
For configuring the kiosk mode, open the “Kiosk Configuration” page on the webmin service. Have a
look to Figure 7. After setting up the homepage, note that the changes has to be committed to the
filesystem. Choose the “reboot-commit now” button to apply the configuration.
Figure 7- webmin kiosk mode
Once the kiosk mode is enabled and a default page is shown at the start up, there are following ways
to (re-)configure the emWEB-21.
1. GUI based modification
Apply a keyboard to the emWEB-21 and press
“Ctrl” + “Shift” + “T”
. This opens a
new browser tab and show the navigation bar. Open “http://127.0.0.1/”
2. Command line based modification
Apply a keyboard to the emWEB-21 and press
“Ctrl” + “Alt” + “F1”
(Alternatively
open a SSH shell).
After pressing, a shell will appear and gives access with the specified credentials. For
modifying the homepage, edit the file
“/etc/kiosk.conf”
