Janz Tec emPC-X Series, Hardware Manual

Page: 23 / 27

emPC-X ( Hardware Manual )
•
Appendices 6 - 21
Rev. 1.2
© Janz Tec AG
6 Appendices
6.1 Technical Data
emPC-X/A-E3815
emPC-X/A-E3825
Processing Core
CPU A-E3815 : Intel Atom E3815 (1x1.46GHz, 512kB L2 Cache)
A-E3825 : Intel Atom E3825 (2x1.33GHz, 1MB L2 Cache)
Qseven Module Congatec QA3
Memory
Main Memory 2 GB DDR3L, 1066 MT/s
Nonvolatile RAM 128 kB MRAM
Storage
CFast 1 x internal socket with SATA 3 GB/s
SD card (Option) 1 x Socket at front panel
Video
Controller Chipset graphics: Intel®HD Graphics with support for DirectX11
OpenGL 3.0, OpenCL 1.2, OpenGLES 2.0, full HW acceleration
for decode/encode of MPEG2, H.264 , MVC
Memory Shared with main memory
Interface 1 x DVI-D single link connector on front panel, up to 1280x1024
1 x Single channel LVDS on internal connector, up to 1024x768
External Interfaces (connector panel)
Video 1 x DVI-D
Ethernet 1 x 10/100/1000 Mbit/s Ethernet (Ethernet 0: Intel i210)
1 x 10/100/1000 Mbit/s Ethernet (Ethernet 1: Intel i210)
USB 3 x USB2.0 (max 500mA per port, max 900mA all ports in total)
CAN (Option) SJA1000 controller
•
ISO/DIS 11898-2 (isolated from logic),
•
software switchable 120 Ohm termination resistor
Serial Port (Option)
Console UART:
•
RS232 (4 wire)
•
RS485, optionally isolated from logic
Xicor 16V2750 (Port expansion):
•
RS232 (full featured)
•
RS485, optionally isolated from logic
Expansion
iX-Bus Internal 8/16 bit interface for IO and low speed peripherals
Indicators and Switches
Reset Pushbutton
Status LED for power supply status (green)
User LEDs 2 programmable LEDs (S0
– red and S1 - green)
System
Housing galvanized steel sheet, outside painted
Battery CR 2032, for real time clock
Temperature Sensor Accessible via Qseven module I2C
Watchdog Yes, implemented in Qseven module