POTSwap User Guide JA16-EVDO-UM
Page 15 Rev: P07 Date: 08/01/16
© Copyright 2016 Janus Remote Communications
Specifications subject to change without notice
All Rights Reserved See website for latest revision. Not intended for life support applications.
Provisioning:
Checking firmware version
carrier revision=2
Verizon firmware version
OK after version check
Wait for registration...
Module is registered (Home)
done (30)
Set MIP profile to 0
OK after setting profile
Enable MIP profile
OK after enabling MIP profile
Enable MIP
OK after enabling MIP
MIP profile:
[Profile:0 Enabled]
[NAI:[email protected]]
[Home Addr:0.0.0.0]
[Primary HA:255.255.255.255]
[Secondary HA:255.255.255.255]
[MN-AAA SPI:2]
[MN-HA SPI:300]
[Rev Tun:1]
[MN-AAA SS:Set]
[MN-HA SS:Set]
[OK]
OK after profile output
Check MDN
Found MDN: $MDN: 2025551212
MDN 2025551212 appears valid
OK after reading MDN
Provision the module
Received OTASP:0) - Start OTASP
Received OTASP:1) - Start OTASP Commit
Received OTASP:2) - End OTASP
NO CARRIER after provisioning
done (23077)
Waiting for shutdown...
Shutdown complete
done (1094)
Wait for re-start
Re-start complete
done (6407)
Wait for registration...
Module is registered (Home)
done (3550)
Check if NAI and profile keys are set
[Profile:0 Enabled]
[NAI:[email protected]]
MDN 2025551212 appears valid
[Home Addr:0.0.0.0]
[Primary HA:255.255.255.255]
[Secondary HA:255.255.255.255]
[MN-AAA SPI:2]
[MN-HA SPI:300]
[Rev Tun:1]
[MN-AAA SS:Set]
MN-AAA SS is set
[MN-HA SS:Set]
MN-HA SS is set
[OK]
OK after profile output
done (24)
Provisioning completed
6 Provisioning continued
Below is an example the output that can be expected from the SERIAL PORT during a successful provisioning:
