background image

Ceiling 

Height

Under Cabinet 

Range hood

36” 

Counter 

Top

  

Max: 36”

24”

 (610 mm) Min / 

36” 

(914 mm) Max

Min: 24” 

Range 

Hood 

Height

Cabinet 

Height

Countertop/Stove

This range hood has been designed to be installed under-cabinet, above a stove/hob. Before start-
ing the installation, consideration should be given as to how the installation will be carried out, 
ensuring adequate space and clearances above the stove/hob.

When installed, the range hood must be positioned at least 24in (61cm) and at most 36in 
(91.4cm) above the cooktop. NOTE: minimum of 30in (76cm) is required for gas stove top.

If the exhaust pipe is too long or there are too many bends, please select a suitable position to 
install the range hood to ensure the appliance can suck-in smoke efficiently. 

• This range hood must be ventilated to the outdoors.
• Do not ventilate the range hood into an attic or other enclosed areas.
• Use only metal/aluminum ductwork. Rigid metal/aluminum vent is recommended. Always keep 
the duct clean to ensure proper airflow.
• Calculate the following figures before installation: 
1. Distance from the floor to the ceiling. 
2. Distance between the floor to the countertop/stove. 
3. Distance between the cooking surface to the range 
hood (recommend* 24” to 36”). 

NOTE:

 minimum of 30” is required for gas stove tops.

4. Height of hood and exhaust duct cover. 

LOCATION REQUIREMENTS:

VENTILATION REQUIREMENTS:

Cabinet or 
Single-piece 
Chimney
(Optional)

Height & Clearance

5

Summary of Contents for RHC-3092





















Reviews: