• This range hood is factory set for venting through the roof or wall.
• Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is
needed.
INSTALLATION INSTRUCTIONS
• It is recommended for the vent system to be installed before hood is installed.
• Before making cutouts, make sure there is proper clearance within the ceiling or walls for the
exhaust vent.
• Disconnect the power.
• A minimum of 8” round or 3-1/4 x 10” rectangular duct (both purchased separately) must be used
to maintain maximum airflow efficiency.
• Always use rigid type metal/aluminum ducts if available to maximize airflow when connecting to
provided duct.
• Place a thick, protective covering over the countertop, cook top or range to protect from damage
or dirt.
• Remove any hazardous objects around the area when installing.
NOTICE:
• NEVER
exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,
attics, or garages. All exhaust must be ducted to the outside.
• Use metal/aluminum duct work only.
• A minimum of 8” round or 3-1/4 x 10” rectangular duct (both purchased separately) must
be used to maintain maximum airflow efficiency.
IMPORTANT:
This installation is for mounting the product under wall cabinetry. Ensure your wall has the
proper support to hold the range hood weight (RHC-3092 30in - 48.4lbs / 22kg, RHC-3692
36in - 52.8lbs / 24kg, and RHC-4892 48in - 62.7lbs / 28.4kg). These instructions are general
guidelines; please consult your installation specialist regarding the best type of mounting
hardware and support system based on your wall construction. All wall-mounted range
hoods, if possible, should be installed and supported by studs behind the wall. In the event
studs are not in alignment with the wall mount mounting plate holes, a wooden cross sup-
port system will need to be retrofitted to your existing studs. All homes are different, and
installations will vary.
WARNING:
Excessive Weight. At least 2 people are required to move and install this range hood. Spinal
or other bodily injuries may occur if this warning is not observed.
PREPARE LOCATION:
VENTING METHODS:
7
