CAUTION:
If moving the cooking range is necessary to
install the hood, ensure the power of an electric
range is turned OFF at the main electrical box.
SHUT OFF THE GAS BEFORE MOVING A GAS
RANGE.
4. For installing under the cabinet with recessed
bottom, it is recommended (but not necessary) to
attach 4-inch wide wood filler strips (not provided) on
each side.
5. When mounting under the cabinet, puncture the
knockout holes on the hood. When mounting on the
wall, fasten the Wall Mounting Bracket to the back of
the hood using hardware provided, or other hard-
ware appropriate for your wall construction type.
If necessary, attach two rubber panels with adhesive
tape to the rear corners of the range hood.
This will help reduce vibrations and shaking when in
operation.
1. Measure the distance between stove top and the bottom of range hood. A distance between 24”
to 30” is recommended. For gas stove tops, a minimum distance of 30’’ and maximum of 36’’ is
recommended.
Make sure the range hood is level and not tilted.
You may choose between
TWO METHODS (A or B)
to install the range hood:
A - Attach the Range Hood Directly to the Kitchen Wall Cabinet:
A-1. Using references in Height & Clearance on Page 5, center the hood beneath the cabinet and
align with the front of the cabinet.
A-2. Draw power cable through cabinet access opening and center the hood beneath the cabinet.
A-3. While the hood is being held in position, insert screws from the inside of the hood into the
center of each knockout hole located at the top panel of the range hood, and secure to the cabinet
bottom. Finish tightening all screws until secure. Be careful when using an electrical screwdriver,
damage to the range hood may occur.
CAUTION:
Make certain the range hood is secure before releasing!
Skip Part B below and proceed to Step 2.
INSTALL THE RANGE HOOD:
4” WIDE
4” WIDE
9