Mixing Station CLEVER II
with Stirring Device R1900 / R1800
- 18 -
4. OPERATION
4.5 POUR OUT MIXTURE
DISCONNECT THE PLUG BEFORE POURING OUT
Lock the cable on the cover in the cable holder.
- Release the brake on the transport wheels.
- Move the device to the pouring point using
the handle and lifting arm.
- To tip over push the release pedal with
your foot
- Tilt the mixing bucket forward on the handle
until the mix flows over the pourer.
- To distribute the mixture, drive the device in
the desired direction.
- To keep the wheels clean, always drive away
from the poured mixture.
- After the pouring process, straighten the
mixing bucket until the unlocker engages
again.
Always hold the handles firmly with both hands.
NEVER LIFT MIXING BUCKET IN FILLED
CONDITION OUT OF THE CHASSIS!!
Pour the material after tilting to a suitable angle
After pouring, hold the handle to return the
bucket to the right position, and restore the
cylindrical pin to the slot as shown in the figure
Stop vacuum
cleaner
operation
Stop mixer
operation
Step on the limit
pedal with your foot
Hold the handle with both hands and
pour the bucket down until the handle
touches the position A in the figure
A
Insert the slot
thr
