Mixing Station CLEVER II
with Stirring Device R1900 / R1800
- 19 -
5 TRANSPORT
The device can be moved effortlessly thanks to the four stable transport rollers.
To prevent unintentional rolling away, two castors can be secured with a brake.
6 STORAGE
The unit should be stored in a dry place where it is protected against freezing.
7 DISPOSAL
Do not open worn out machines and return to the collection facilities for recycling.
8 MAINTENANCE
-
The ventilation slots on the motor casing should be cleaned out from tie to time.
-
When the carbon brushes are worn out, the machine switches itself off.
The machine must then be sent to customer services for maintenance
(see enclosed sheet)
-
After approx. 100 hours of operation, check the motor brushes and replace if
necessary. Clean the motor housing.
-
After approx. 200 hours of operation, renew the grease filling in the gearbox.
To verify thet the protective insultation remains intact machine must be subjected to a
technical safety test afterwards. For this reason, this work must be performed
exclusively by a professional electro electro-workshop.
