background image

  Mixing Station   CLEVER II 
  

with Stirring Device R1900 / R1800

 

 

 

- 4 - 

1. SAFETY INSTRUCTIONS  

 

SYMBOLS 

 

WARNING  

The following show symbols used for the machine. Be sure that you  

understand their meaning before use. 

 

 

 

To reduce the risk of injury read the instructions manual  

carefully before use 

 

Danger: Risk of injury and equipment damage. 

 

Wear strong work clothes. 

 
 

WARNING  Read all safety warnings, instructions, illustrations and 

specifications provided with this power tool. Save all warnings and 

instructions for future reference. 

 
 

1) WORK AREA SAFETY 

a)   Keep work area clean and well lit.  

 

Cluttered or dark areas invite accidents. 

 

b)  Do not operate the mixer in explosive atmospheres, such as in the presence  

 

of flammable liquids, gases or dust. The mixer create sparks which may ignite  

 

the dust or fumes. 

 

c)  Keep children and bystanders away while operating machine. Distraction  

 

can cause you to lose control.  

 

 

PRECAUTION 

Keep children and infirm persons away. When not in use, machine should be stored 

out of reach of children and infirm persons. 

 

 

Summary of Contents for CLEVER II





















Reviews: