7
Initial operation
7.1
Overload protection
The electric motor stops when overloaded.
Immediately reduce the load on the machine when it is overloaded. Let the machine cool down for
about 30 seconds at max. idle-running speed with no load.
Attention
Risk of injury.
Always use the correct supply voltage.
Voltage of the power supply must match the information on the machine
identification plate.
Attention
Risk of injury.
Only use undamaged cutting tools.
Prior to any start-up check cutting tools for damages.
Switching on
o
Push forward the ON/OFF switch
(Fig. 1/
3).
Switching off
o
Release the ON/OFF switch
(Fig. 1/
3).
Locking
o
Push the ON/OFF switch
(Fig. 1/
3) as forward as possible and press
it down for locking.
Switching off
o
Press the ON-OFF switch
(Fig. 1/
3) down at the end; the switch will
return to the OFF position.
30
Summary of Contents for BEPo UFS 115 N Twist
Page 2: ......
