Janome QUILT MAKER PRO, Instruction Manual

Page: 12 / 56

Page 12
Quilt Maker Pro 18 User Manual
201704
3. Ensure the foot is centered with the needle when the
foot is fully tightened with the 2.5mm hex wrench. If
it isn’t properly centered, loosen the lock nut; center
the foot with the needle; hold the foot in position; and
firmly tighten the lock nut (Figure 9).
Your machine came with two Feet: a ruler foot and an
open-toe foot. Use the ruler foot for ruler work and
everyday quilting, and the open-toe foot when you need
greater stitch visibility (such as micro quilting). Other
Feet are available, such as the Couching Foot Kit.
1. Remove the foot that is on the mount by using the
2.5mm hex wrench to loosen the mounting screw far
enough that you can slide the foot off of the mount.
2. Slide the desired foot onto the mount (figure 8). Note
that the opening on the side of the foot is lined up
with the screw hole. Push the Foot up as far as it will
go.
Changing the Feet
Figure 8
Figure 9