Janome Quilt Maker Pro 20 VERSA ST User Manual Download Page 47

Page: 47 / 68

Quilt Maker Pro 20 Versa ST User Manual

Machine Settings

To open the machine settings, touch the

Settings

icon in the Toolbar.

After selecting it, the icon turns Blue.

Then choose one of the several options that appear along the bottom of the screen.

After you select an option, the button background turns green and the screen changes,
allowing you to customize that setting. The next time you touch the

Settings

icon, the last

Settings option you used appears.

• Press the

Home

icon in the upper left corner of the screen to close

Settings

and return

to the Main screen.

The

Machine

Settings

button is

selected

(blue).

Low

Bobbin

Alarms

Turn ON

or OFF

Laser

Configure

Alarms

Set

Language

QMP20 VersaST_User Manual _3.23.indd 47

3/24/23 3:25 PM

Summary of Contents for Quilt Maker Pro 20 VERSA ST





































































Search results

Summary of Contents for Quilt Maker Pro 20 VERSA ST

Reviews:

Related manuals for Quilt Maker Pro 20 VERSA ST

Brands by name

Popular brands

Janome Quilt Maker Pro 20 VERSA ST, User Manual

Search results

Summary of Contents for Quilt Maker Pro 20 VERSA ST

Reviews:

Related manuals for Quilt Maker Pro 20 VERSA ST

Brands by name

Popular brands