Janome Quilt Maker Pro 20 VERSA ST User Manual Download Page 46

Page: 46 / 68

www.janome.com

Tension Reset

1. Begin by loosening your tension discs by

turning the

Tension

knob counter clockwise

until the two tension discs move freely. This
may take a few complete turns.

2. Then turn the

Tension

knob clockwise until

the tension discs come together enough to
have a bit of resistance.

3. Touch the

Tension

button in the Toolbar.

The Easy-Set Tension Display will now
read as

4. Turn the

Tension

knob three full clockwise

turns to return the tension close to factory
settings.

Diagnostics

There are several diagnostics tests that you may be asked to perform by Janome's technical
solutions team or an authorized Janome retailer. They will give you a code to enter into the
Diagnostics screen to be able to perform the tests.

• Touch the

Tools

button in the Toolbar. Then touch the

Diagnostics

button along the bottom

of the screen. Enter the code you received and follow the instructions for the different
diagnostics tests.

QMP20 VersaST_User Manual _3.23.indd 46

3/24/23 3:25 PM

Summary of Contents for Quilt Maker Pro 20 VERSA ST





































































Search results

Summary of Contents for Quilt Maker Pro 20 VERSA ST

Reviews:

Related manuals for Quilt Maker Pro 20 VERSA ST

Brands by name

Popular brands

Janome Quilt Maker Pro 20 VERSA ST, User Manual

Search results

Summary of Contents for Quilt Maker Pro 20 VERSA ST

Reviews:

Related manuals for Quilt Maker Pro 20 VERSA ST

Brands by name

Popular brands