36
|
www.janome.com
Stitch Regulation Mode
There are two stitch regulation modes:
Cruise
and
Precision
.
To use Cruise Stitch Regulation
• Touch the
Regulated
button and then touch the
Cruise
button.
After you press the
Start/Stop
button, the Start stitching indicator in the upper-left corner
of the screen turns blue and the needle begins moving up and down according to the cruise
speed orspeed percentage setting.
When you start moving the fabric, the needle will move according to the stitches-per-inch
setting. Similarly, as you bring your quilting to a stop, the needle will continue moving at the
cruise speed (speed percentage) until you press the
Stop
button on the touchscreen.
The minimum speed of the needle is dependent upon the speed percentage setting you
choose. Janome recommends beginning with a setting of 8%. Begin moving the machine
immediately after pressing the
Start/Stop
button to avoid stitching in place for too long.
QUILTING TIP
: The constant minimum stitching speed featured in the Cruise stitch
regulation is useful when creating sharp points such as the point of a star or the
bottom of a heart.
The
Regulated
Mode
button
is selected.
The
Cruise
stitch regulation
button is
selected.
QMP20 VersaST_User Manual _3.23.indd 36
QMP20 VersaST_User Manual _3.23.indd 36
3/24/23 3:25 PM
3/24/23 3:25 PM
