Quilt Maker Pro 20 Versa ST User Manual
|
27
4. After the thread is in place, be sure that the thread catches on the take-up spring. Then
guide the thread under the stirrup thread guide
⑧.
5. Bring the thread up and through the hole of the take-up lever
⑨
from back to front, and
then through the pigtail thread guide
⑩,
and thread through the needle bar thread guide
hole
⑪.
6. Make sure the thread follows the groove down the front of the needle and insert the thread
through the eye of the needle from front to back
⑫.
While pulling thread through the eye of
the needle, be careful that the thread does not twist around the needle.
2
1
3
4
5
6
7
8
9
10
11
12
4
5
6
7
8
9
10
QMP20 VersaST_User Manual _3.23.indd 27
QMP20 VersaST_User Manual _3.23.indd 27
3/24/23 3:25 PM
3/24/23 3:25 PM
