AAASewing.com
35
Cloth guide
CAUTION:
Always leave sufcient space to the left of the machine
when using the cloth guide.
Do not use the cloth guide when the buttonhole foot R is
attached.
The extension table cannot be opened when the cloth
guide is in use.
Attaching the cloth guide
Attach the embroidery unit (refer to page 83).
Insert the pin on the cloth guide into the carriage hole.
Turn the attaching knob clockwise to secure the cloth
guide.
q
Pin
w
Cloth Guide
e
Carriage Hole
r
Attaching knob
Setting the cloth guide position
Press the adjust key to open the manual setting window.
Press the cloth guide key.
t
Cloth guide key
The visual touch screen will show a warning message.
Press the OK key.
The cloth guide adjustment window will open.
Press the or keys to move the
cloth guide to the desired position.
The cloth guide will move the distance indicated on the
key.
The cloth guide position is indicated on the scale bar
and the distance from the center needle drop position is
indicated in millimeters or inches.
NOTE:
The machine will not run if the cloth guide adjustment
window is open.
Press the default key to return the cloth guide to the
default position (15 mm or 5/8).
y
Default key
Make sure to return the carriage to the stored position by
pressing the cloth guide storage key and remove the cloth
guide after you nish sewing.
u
Cloth guide storage key
Press the OK key to register the setting and close the
cloth guide adjustment window.
t
u y
r
q
e
w
Janome MC9900 Instruction Manual
Janome Embroidery Machine
www.aaasewing.com
MC9900 Owners Manual/ User Guide
